Good helper for Organic fertilizer fermentation —— trough turner

Nov. 13, 2020

The production of organic fertilizer by using the fermentation tank model is a kind of process in which the raw materials are placed in the fermentation tank, and the materials are turned over, stirred, and broken in the tank, so that the materials are fermented, matured and degraded, it is easier to obtain stable product performance and better odor control than static compost.

The trough type turner has the advantages of reasonable structure, high efficiency, low energy consumption, a high degree of automation, convenient use, and low cost. The trough turner will save more land occupy and the fermenter is built with two walls on the flat ground to form one or more fermenters. The turner works on the fermenter and is usually driven by a motor. Due to the high-speed rotation of the drum, the blade on the drum in the fermentation tank broken and mixed fermentation material, at the same time, materials are rolled by the drum, stacked loose.

Fertilizer Turner

Common problems and solutions of organic fertilizer turner:

1.hard to turning

It is often due to excessive thickness of the fertilizer layer, serious deformation of the blade and shaft or foreign body winding, or foreign body stuck or damaged on the transmission teeth. This can be done by removing excess fertilizer layers, repairing blades or shafts, and removing foreign bodies.

2. Uneven running, gear reducer with noise or fever

Usually is it because there are foreign bodies inside the running gear or tooth, or lack of lubrication, the commonly used solution is to remove the foreign body, add lubricating oil.

3. hard to start or can not start, with bourdonnement

it usually happens with there is a problem with the bearing, May Be too large bearing wear or damage or reduction shaft deformation, bending, so when making the maintenance of the bearing, need to check the bearing, timely make a replacement. This problem can also be caused by a low or high voltage, which can wait until the voltage stabilizes before starting.

FDSP's organic fertilizer special turner machine has high efficiency, stable operation, solid and durable, turnover throwing uniform, according to the moisture density of materials at any time to adjust the walking speed, one-time completion of the entire tank operation and throwing speed, the utility model has the function of crushing materials, and the full contact between materials and air is achieved, so that the fermentation effect of the materials is better.

About Us

FDSP was founded in the year of 2003, which locates in Liyang city,Jiangsu Province ,China, covering the area of 35000㎡. As a national high-tech enterprise,FDSP company will always be the first rank, which is the supplier and advanced system solution for the Feed machinery, biomass machinery, fertilizer machinery and project, etc. The main business is design, research, manufacture, sale, installation and wholesale project service for feed machinery, biomass machinery, fertilizer machinery, silo machinery, pellet mill molds and intelligent control system. 

Contact Us

Marketing Center: +86-519-6826 6288 /+86-17705145508

Engineering Center: +86-519-6826 6588 /+86-15206145688

South Factory: No.6 Chenyang Road, Zhongguancun Science & Technology Industrial Park, Liyang, Jiangsu, China

North Factory: No.558 Hongsheng Road, Zhongguancun Science & Technology Industrial Park, Liyang, Jiangsu, China

Copyright © Jiangsu Liangyou Zhengda Co., Ltd. (FDSP) All Rights Reserved.