Nov. 06, 2020
In recent years, driven by the breeding industry, the feed processing industry has made rapid development and progress, which has further promoted the development of the feed machinery industry. However, due to the influence of factors such as incorrect operation, installation defects, and improper maintenance in the production process, there are certain hidden safety hazards. Therefore, we must pay more attention to this issue and do a good job of preventing potential safety hazards. China Feed Machinery Manufacturer will introduce you to one of the issues in the feed processing process.
1. The flywheel lacks a safety shield
The flywheel lacks a safety protection cover. It is easy to twist the staff’s clothing into the high-speed rotating belt when working carelessly or in an emergency. It will also cause foreign objects to fall on the belt to be thrown to the presence of the high-speed belt. Staff, causing unnecessary injuries.
2. Lack of iron removal device in front of key equipment
The raw materials in the feed processing machine conveying process contain metal, especially iron impurities, such as screws, gaskets, iron pieces, and other feed may enter the grinder, from the sieve pieces, hammer pieces, heavy It directly penetrates the body and poses a direct threat to the safety of the staff.
Feed Processing Machine
3. There is no dust cover at the small material inlet
The small feed port puts some finer raw materials, such as mineral additives, vitamin additives, etc., before these raw materials enter the mixer, it is easy to cause dust to be absorbed by the human body. Long-term large amounts of inhalation will cause chest tightness, dizziness, nausea, and other discomforts. Symptoms, serious ones, can affect your health.
Fourth, preventive measures
In view of the above situation, in addition to doing various safety checks and personal protection before starting the machine, the following methods will achieve good results. Adding a good quality protective cover can effectively avoid accidental injury; adding iron removal equipment after the raw material is cleaned, before crushing, and before granulation can effectively prevent the damage and danger caused by iron impurities entering the host equipment; in small materials, A closed flap is added at the height of about 30 cm to 40 cm of the inlet, so that it is convenient to add a large number of raw materials, such as premix, additives, etc., and can also prevent the spread of dust.
Liangyou will provide customers with a safe and scientific whole plant planning and a complete set of solutions, so you have no worries.
FDSP was founded in the year of 2003, which locates in Liyang city,Jiangsu Province ,China, covering the area of 35000㎡. As a national high-tech enterprise,FDSP company will always be the first rank, which is the supplier and advanced system solution for the Feed machinery, biomass machinery, fertilizer machinery and project, etc. The main business is design, research, manufacture, sale, installation and wholesale project service for feed machinery, biomass machinery, fertilizer machinery, silo machinery, pellet mill molds and intelligent control system.
Marketing Center: +86-519-6826 6288 /+86-17705145508
Engineering Center: +86-519-6826 6588 /+86-15206145688
South Factory: No.6 Chenyang Road, Zhongguancun Science & Technology Industrial Park, Liyang, Jiangsu, China
North Factory: No.558 Hongsheng Road, Zhongguancun Science & Technology Industrial Park, Liyang, Jiangsu, China