MZLH420 Wood Pellet Mill

It is widely used for pelletizing of light substances, such as wood chips, sawdust, straw, pasture, chrysanthemum, palm leaf and so on

Product Features:
■ It is widely used for pelletizing of light substances, such as wood chips, sawdust, straw, pasture, chrysanthemum, palm leaf and so on;
■ The feeder's especial structure makes materials conveyed evenly. It is specially designed for pelletizing of  light substances with the density of 0.15-0.65g/cm3;
■ Feeder,conditioner and chute are made of stainless steel with long service life;
■ It is with magnet and over load protection system which can protect machine well during production;
■ It makes gear directly-connecting as the driver and is with quick-release die fixed by clamps,which can increase the output by 15% more than the same type machine with belt-convey;

■The bearings and oil seals in the main drivers are imported from Japan to ensure highly-efficient,stability and credibility.


Biomass wood pellet application:

Civilian heating:high use ratio and easily

Biomass industrial boiler:be used as the main fuel of the industrial boiler,solve the problem of environmental pollution.

Power generation:be as the fuel of thermal power generation.


MZLH420 Wood Pellet Mill




Model   Parameter    MZLH420         MZLH508-LMZLH680
Ring die inner   diameter (mm)420500688
Ring die working width(mm)90100110
Ring die linear   speed (m/s)3.163.783.54
Number of clamp3 pcs3 pcs8 pcs
Number of roller2 pcs2 pcs2 pcs
Number of cutter1 pcs1 pcs1 pcs
Motor power90+2.2+0.7590+2.2+1.5185+3.0+1.5
Motor rotation speed750750595
Ring die hole   diameter(mm)6/8/106/8/106/8/10



Ring die materials:4Cr13

Stainless steel feeder:With broken arch function

Door cover of granulating chamber:-6/SUS304

Forced feeding: worm gearing reducer

Gearbox Casing:HT250

Wheel gear:42CrMo

Gear shaft:20CrMnMo

Main shaft:40Cr

Hollow shaft:forge piece 45#

Bearing:gear shaft, main shaft bearing is NSK, roller bearing is domestic high quality bearings

Oil seal:Germany/Taiwan

Overload mechanical protection:safety pin

Serpentine spring coupling drive

Lubrication system: Automatic oil filling system is available

Morot: Siemens (China) motor or Wannan motor


None

About Us

FDSP was founded in the year of 2003, which locates in Liyang city,Jiangsu Province ,China, covering the area of 35000㎡. As a national high-tech enterprise,FDSP company will always be the first rank, which is the supplier and advanced system solution for the Feed machinery, biomass machinery, fertilizer machinery and project, etc. The main business is design, research, manufacture, sale, installation and wholesale project service for feed machinery, biomass machinery, fertilizer machinery, silo machinery, pellet mill molds and intelligent control system. 

Contact Us

Marketing Center: +86-519-6826 6288 /+86-17705145508

Engineering Center: +86-519-6826 6588 /+86-15206145688

South Factory: No.6 Chenyang Road, Zhongguancun Science & Technology Industrial Park, Liyang, Jiangsu, China

North Factory: No.558 Hongsheng Road, Zhongguancun Science & Technology Industrial Park, Liyang, Jiangsu, China

Copyright © Jiangsu Liangyou Zhengda Co., Ltd. (FDSP) All Rights Reserved.