Take the leftover material from furniture factory or wood processing factory as raw material to solidified and extruded into high density biomass pellet through pretreatment and process. Biomass pellets does not contain sulfur or phosphorus. When it burns, it does not produce sulfur dioxide and phosphorus pentoxide and will not cause acid rain, does not pollute the atmosphere and the environment. As a new type of particle fuel has won wide recognition. Compared with the traditional fuel, it not only has the economic advantage but also has the environmental protection benefit, fully conforms to the sustainable development request.
Jiangsu Liangyou Zhengda Co., Ltd is specialized in manufacturing biomass pellet fuel production machinery, we can supply customer: biomass pellet production line which take wood log, sawdust, shavings as raw material, biomass pellet production line which take building templates, woodworking scrap as raw material, biomass pellet production line which take maize stalk, wheat stalk, straw and others as raw material, biomass pellet production line which take fruit shell, fruit residue, palm and others as raw material, biomass pellet production line which take Crop waste, sludge, coal and others as raw material. FDSP will customize kinds of complete project solutions to meet customers' different needs.
Now we take the case of 2.5-3.5t/h leftover material pellet production line, make introduction based on process diagram and each process as follows:
Technological process chart:
Chipping process--Grinding Process--Pelleting Process--Cooling and packing process
Leftover material mainly from furniture factory, wood processing factory, wooden door manufacturer.
Make the leftover material into wood chips with 20-30mm dimension and 3mm thickness by chipping machine, then fine grinded into sawdust with 3-4mm by hammer mill, finally go to the pellet mill to make pellets, the final pellet diameter are optional from 6-10mm. After pelleting and cooling, it will be packed into 20-50kg/ bag by small bag packing scale for convenient transportation and sale. This Leftover material pellet production project can produce biomass pellet 3tons per hour and has a total power of 475kw, the area of workshop is about 1000㎡including the raw material warehouse and finished products warehouse, the whole line is characterized by compact design and reasonable structure, and satisfied by environment protection requirements, meanwhile it can be directed to customers design.
The process is as follows
In the chipping process of leftover material pellet production project, leftover material are chipped into wood chips with 20-30mm dimension and 3mm thickness then go to following process. The feeding system of chipper consists of feeding part and press part, automatic control hydraulic system are adopt in press part, the material going smoothly in feeding system, material could be returned when overloaded to prevent blockage.
Chipper: LYGX216，main power 55kw，feeding roller power 3kw, oil pump power 0.55kw, capacity 10m3/h
The grinding process of leftover material pellet production project consists of more than one auxiliary equipment such as cyclone, bag filter, and the grinding work has no dust discharge. After grinding, the sawdust will be transported through pneumatic transmission by the fan suction air pressure. The output sawdust is generally about 3-4 mm. The hammer mill is a water droplet type structure with high grinding efficiency; the hammer mill rotor can be operated in forward and reverse directions to improve the service life of the hammer blade; the direct transmission mode of the motor is adopted, the transmission efficiency is high, and the maintenance is convenient.
Hammer mill: MFSP68*80，power 90kw，capacity: 3-4T/H
Three sets of MZLH420 biomass pellet mill were designed in the pelleting process. The diameter of biomass pellet is optional from 6-10mm, and the biomass pellets have the characteristics of high calorific value, no pollution and low ash content, which can be widely used in biomass power plants, biomass steam boilers, household fireplaces, drying furnaces and biomass gasifier. The overleft material pellet production project has obvious advantages in the pelletizing process: the pellet mill is equipped with a forced feeder to force feeding into the ring molding chamber, which can make the pellet mill run smoothly, do not block the materials, and produce efficiently. Specially design of broken screw feeding, so that the poor flow raw materials smoothly feeding.
Pellet mill: MZLH420, main motor power: 90kw, power of forced feeder: 0.75kw, design with 1T/H output , quantity: 3sets
Cooling and packing process
In this cooling process of leftover material pellet production project, a cooler is used to reduce pellets temperature and decrease pellets moisture, low energy consumption, easy operation, high automatic degree, through the cooler cooling, pellets temperature is not higher than ambient temperature 5 ℃, after cooling the pellets moisture around 8-10%, particle density 650-750kg/m³.
According to the customer's local sales needs, the appropriate packing scale is selected for customer to sell products more easily. There are usually two specifications: small bag and ton bag. 20-50kg/bag for small bags, 500-1000kg/bag for ton bags. The packing scale has high automation degree, high packing accuracy, and The measurement by sensor in the weighing system is with high sensitivity and strong anti-interference ability.
Cooling equipment: SKLB2.5, cooling volume : 2.5m3 , design with 3-4t/h output.
Packing scale: SDBLY-K，bag size20-50kg/bag，packing speed: 3-5bag/min
Marketing Center: +86-519-6826 6288 /+86-17705145508
Engineering Center: +86-519-6826 6588 /+86-15206145688
South Factory: No.6 Chenyang Road, Zhongguancun Science & Technology Industrial Park, Liyang, Jiangsu, China
North Factory: No.558 Hongsheng Road, Zhongguancun Science & Technology Industrial Park, Liyang, Jiangsu, China